Posts for tag: orthodontic treatment
Dentists extract millions of teeth each year, mostly because of disease. But sometimes a healthy tooth is removed to gain a more favorable, long-term dental health outcome.
An example of this is extracting teeth for the sake of orthodontic treatment. This is often beneficial when treating bite problems caused by crowding, a condition in which not enough space on the jaw exists to accommodate all of the teeth coming in. When this happens, the limited space can force teeth out of their proper alignment.
Crowding also complicates correcting the bite problem with braces: As with the eruption phase, there's no available room for orthodontic movement. One solution that may arise after a detailed examination is to open up space on the jaw by removing some of the teeth.
Planning this kind of tooth extrication requires careful forethought with the end in mind—ultimately, the dental providers involved want the resulting appearance after braces to look as natural as possible. For that reason, dentists usually choose teeth for extraction that are outside of the "smile zone" (the teeth visible while smiling) like premolars and molars.
Additionally, dentists are concerned about bone loss after extracting the teeth. Bone often diminishes around empty tooth sockets, especially if those sockets were damaged during extraction. This loss in bone can weaken the jaw structure and cause significant problems while moving teeth with braces.
To avoid this, dentists take great care during tooth removal not to damage the socket. Additionally, they may place a bone graft within the socket immediately after removing the tooth, especially if the space will remain vacant for a significant period of time. A bone graft serves as a scaffold upon which new bone cells can form and accumulate.
After the extractions, the orthodontist may then proceed with correcting the bite. Patients may also need some form of prosthetic teeth to fill in the spaces while wearing braces. Often prosthetic teeth can be incorporated with the braces for a more natural look. After braces, any remaining gaps may require further restoration, either with dentures, bridges or, later in adulthood, dental implants.
Complex bite problems like crowding pose unique challenges in correcting them. But using techniques like tooth extraction can help achieve a successful and satisfactory outcome.
If you would like more information on treatments for bite problems, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”
Dentists remove millions of teeth each year, often because of tooth decay or gum disease. But disease isn't the only reason—a tooth extraction might make it easier to straighten a crooked smile.
Realigning teeth for therapeutic or cosmetic reasons is a regular undertaking in dentistry, but the process itself often differs from person to person. Each individual patient requires their own treatment plan taking into account factors like the kind of bite problem involved, the size of the jaw and the space available to move teeth.
This plan could indeed involve removing teeth. For example, an abnormally small jaw could cause crowding. Not only can crowding move teeth out of position, it may also leave little to no room for moving teeth. Although dentists can minimize crowding by influencing jaw development in early childhood, removing teeth for more space is usually the only option available to older adolescents and adults.
Similarly, teeth can fail to erupt properly and remain partially or fully submerged beneath the gums (known as impaction). There is an orthodontic method for pulling an impacted tooth fully onto the jaw, but only if the tooth isn't too far out of alignment. Otherwise, it may be better to remove the impacted tooth and then correct any gaps with braces or a dental implant.
There's also a situation on the opposite side of the spectrum that could benefit from teeth removal—when one or more permanent teeth fail to form, known as congenitally missing teeth. This can cause gaps in the smile or a “lopsided” appearance where a tooth on one side of the jaw is present while its counterpart on the opposite side of the jaw is missing.
The missing tooth can be replaced by an implant, bridge or other restoration. But another option may be to remove the existing counterpart tooth, and then close the gaps. This can result in a much more attractive smile that might be simpler and less costly than replacing the missing tooth.
Again, the decision to remove teeth to improve smile appearance depends on the patient and their particular dental condition. But in the right situation, it could make straightening a smile easier and more effective.
If you would like more information on orthodontic treatments, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Teeth for Orthodontic Treatment.”
If you're into social media, you might have run across the idea that there's nothing to straightening your teeth. According to some SM influencers, you can even do it yourself with a few rubber bands. But the truth is, the mechanics of moving teeth are much more complex—and taking orthodontics into your own hands can cause extensive dental damage.
In reality, all bite problems (malocclusions) require the advanced knowledge and expertise of an orthodontist to correct them safely and effectively. Some, in fact, may require other devices along with braces or clear aligners to achieve the desired outcome for a particular malocclusion.
Here are a few of those additional tools an orthodontist may use and why they may be needed.
Headgear. Some malocclusions result not just from misaligned teeth, but problems with jaw or facial structure development. To accommodate additional factors like this, an orthodontist may include headgear during treatment, usually a strap running around the back of a patient's head or neck and attached in the front to brackets bonded to the teeth (usually the molars). Wearing this headgear for several hours a day can improve jaw and facial development.
Elastics. Unlike basic rubber bands DIYers might use to move their teeth (often with damaging results), elastics are specialized bands designed for targeted tooth movement. They're needed for bite problems that require moving some teeth and not moving others. As such, elastics can be applied in conjunction with braces to perform either intended task—move or prevent movement for specific teeth.
Anchorage. One of the tools often used with elastics for targeted tooth movement are temporary anchorage devices (TADs). These are typically tiny screws imbedded into the jawbone a short distance from fixed braces. An elastic band connected to the braces at a specific point is then attached to the TAD, which serves as an anchor point for the elastic.
These and other devices can help orthodontists achieve a successful correction for certain individual bite problems. And unlike the DIY methods touted on the Internet, these additional tools help them do it safely.
If you would like more information on straightening teeth through orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
Celebrities’ controversial actions and opinions frequently spark fiery debates on social media. But actress Dakota Johnson lit a match to online platforms in a seemingly innocent way—through orthodontics.
This summer she appeared at the premier of her film The Peanut Butter Falcon missing the trademark gap between her front teeth. Interestingly, it happened a little differently than you might think: Her orthodontist removed a permanent retainer attached to the back of her teeth, and the gap closed on its own.
Tooth gaps are otherwise routinely closed with braces or other forms of orthodontics. But, as the back and forth that ensued over Johnson’s new look shows, a number of people don’t think that’s a good idea: It’s not just a gap—it’s your gap, a part of your own uniqueness.
Someone who might be sympathetic to that viewpoint is Michael Strahan, a host on Good Morning America. Right after the former football star began his NFL career, he strongly considered closing the noticeable gap between his two front teeth. In the end, though, he opted to keep it, deciding it was a defining part of his appearance.
But consider another point of view: If it truly is your gap (or whatever other quirky smile “defect” you may have), you can do whatever you want with it—it really is your choice. And, on that score, you have options.
You can have a significant gap closed with orthodontics or, if it’s only a slight gap or other defect, you can improve your appearance with the help of porcelain veneers or crowns. You can also preserve a perceived flaw even while undergoing cosmetic enhancements or restorations. Implant-supported replacement teeth, for example, can be fashioned to retain unique features of your former smile like a tooth gap.
If you’re considering a “smile makeover,” we’ll blend your expectations and desires into the design plans for your future smile. In the case of something unique like a tooth gap, we’ll work closely with dental technicians to create restorations that either include or exclude the gap or other characteristics as you wish.
Regardless of the debate raging on social media, the final arbiter of what a smile should look like is the person wearing it. Our goal is to make sure your new smile reflects the real you.
If you would like more information about cosmetically enhancing your smile, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine articles “Space Between Front Teeth” and “The Impact of a Smile Makeover.”
Each year, millions of children and teenagers wear braces or clear aligners to straighten a crooked smile. But there may be a way to treat some of these bite problems and avoid braces—by intercepting the problem at an earlier age.
This can often be done if the bite problem stems from abnormal jaw development rather than misaligned teeth. An example of this occurs when the upper jaw growth outpaces the lower jaw, causing the upper teeth to protrude beyond the lower teeth. Aside from the effect on appearance, protruding front upper teeth may extend beyond the protection of the lip and be more prone to injury.
A device called a Herbst appliance could prevent this from happening. The top of the device has two hinged metal tubes that connect to elastic bands bonded to the back teeth on both sides of the upper jaw. The bottom also has tubes affixed in the same way to the bottom teeth, except they're slightly smaller and fit within the upper tubes.
The lower tubes sliding within the upper tubes produces slight pressure against the lower jaw to ease it forward. This gradually influences the lower jaw to grow at a pace equal with the upper jaw to decrease the chances of poor bite development. Unlike other corrective methods, the Herbst appliance fixed in place and out of the way won't interfere with sports or other physical activities.
An installed Herbst appliance may change a patient's sensations during swallowing, eating or speaking, but most children adapt to the changes within a few days. And, because the device can create challenges for keeping the back teeth clean, many dentists recommend adding a fluoride rinse to daily brushing and flossing as an added boost against tooth decay.
The Herbst appliance is most effective during the period of most rapid physical growth between the ages of 11 and 14, but if the teeth are already beginning to protrude it can be undertaken as early as 8 or 9. Either way, this important orthodontic tool could help address a complicated bite problem and reduce the need for more costly orthodontic treatment later on.
If you would like more information on early interventions for poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Herbst Appliance.”